im not a x but here are the things that will be done by then hopefully ill be able to make it
calmini sas
5.38 in front with arb
5.38 and detroited 9"
36" iroks
co2
bed bobbed
front and rear bumpers
finally get the staun internal beadlocks installed i won last year at gone

hopefully exo caged and maybe durabak on the rest of the truck later
cameron

Get your truck all fixed up from the accident, or did you get a new one?

got it fixed and 2 weeks later i got rear ended by a guy street racing so thats how im doing all this you planning on going

Hey Everyone,

I think I'm ready for Moab this year...See You All There!!!

KaiOtiKs Installed Mods:

ARB Front Winch Bumper
Calmini 3” Suspension Lift
Calmini Heavy Duty Steering System
Calmini Rear Swing Away Bumper
Spencer Low Racing M300 29MM Torsion Bars
Spencer Low Racing Fiberglass Front Fenders
Spencer Low Racing 3" Rear Shackles
Custom Made Rear Spring Packs with Anti-Sway Brackets
Rancho RS9000 9-Way Adjustable Front & Rear Shocks
Skid Row Skid Plates Full Undercarriage Including Gas Tank Skid Plate
Calmini Rear Differential Skid Plate
4crawler Offroad Custom Manufactured Rock Sliders
R200A Front Limited Slip Differential
RD24 ARB Rear Air Locking Differential with Heavy Duty Paraflex Air Lines
ARB Air Compressor with Heavy Duty Paraflex Air Lines
PowerAid Throttle Body Spacer
K&N Cold Air Intake System
Flowmaster 50 Custom Midas Manufactured Exhaust System
Mohave Teflon Coated 15” x 8” Custom Wheels (Set of 5)
BF Goodrich All Terrain 33x12.50x15 Tires (Set of 5)
Custom Line-X Trim, Rockers, Sliders, & Top of Rear Bumper
Mile Marker SE 12,000LB Winch
Warn Quick Dis-Connects for Hoist
Amsteel Blue Synthetic 3/8” x 100’ Fiber Winch Rope
Custom Manufactured Hawse Fairlead
Heavy Duty XD Blue Winch Hook
Heavy Duty Bumper Shackle Mounts Qty-2 Front Bumper & Qty-2 Rear Bumper
Mile Marker Heavy Duty Winch Recovery Kit
48” Off-Road High Lift Jack with Fourtreks Custom Fabricated Mounts
4 ea 4"x4" 85w Piaa 510 Driving Lights
(Mounted on Custom Fabricated Lightbar with Fourtreks Custom Mounts)
4 ea 6”x6” 85w Piaa 520 Fog Lights
(Mounted on ARB Front Bumper with 2 Fabricated Light Mounts)
Optima Yellow Top Deep Cycle Battery
Front Nissan Bug Shield
Side Window Air / Rain Deflectors
Rear Wind Deflector
Custom Velour Navy Blue Dash Mat
Carpeted & Heavy Duty Rubber Floor Mats
AdventureRak Roof Cargo Rack
Powertank 15LB with Custom Fabricated Rear Mounting Bracket
Vector 12v/400Amp Battery Charger
Wet Oakle Full Neoprene Seat Covers Front & Rear
Corbeau A4 Front Seat Replacements With Custom Seat Mounts
Cobra 75 WX ST All-In-Handset Mobile CB Radio
GMRS/FRS 2-Way Auto Radio with a 10-Mile Range
Alpine In-Dash IVA-D900 Mobile Multimedia DvD Station with 7” Monitor
Apine MRV-F545, V-12, 600 Watt, 4-Channel Car Amplifier
(Mounted on Custom Fabricated Subwoofer Box)
Alpine SWR-1222D 12" Type-R Series Subwoofer
Garmin Streetpilot 2610 4GB GPS with External Mounted GPS Antenna

Mods Yet To Be Installed:

Calmini SAS Kit
Calmini SAS Front Sway Bar
Calmini SAS Front CV Driveshaft
Calmini SAS Front Coil Over Shocks
Calmini SAS Rear Leaf Sping Packs
Jeep Wagoneer Front Dana 44 Solid Axle
Front Locker for Front Solid Axle
New Gears for Front Solid Axle
New Axles for Front Solid Axle
New Bearings for Front Solid Axle
ETC...You Get The Idea!!!

I am going to wait until my Xterra is paid off, to get the Calmini Solid Axle Conversion Kit...Hopefully by Christmas 2006!!!

Holy Crap!

I'm just trying to get my steering kit going.

Am going to have my rear Shrock on, though.

Daaaaaaaaaang!

I'm with Bobby! haha, I'll be lucky if I get my steering kit on!

Hey Guys,

It's taken me about 4 years total to get all that stuff installed on my X...

Plus, all the repairs from dead, cracked, or broken parts along the way, I had purchase again to replace...

Of course, their are some lucky ones out there that can get everything "Right Now" and have it all installed within a week or two from the time they receive the parts...

Although, I suspect the good majority of the rest of us just get something once a month or every other month...

Good luck you guys with your steering systems...

I have a little more than steering to straighten out before I am ready.

I have to figure out where this goes

Picked up one of these yesterday...



Should be getting a used Calmini Steering kit in the next week or 2.

I knew it would'nt be long!

you bastard

Hey DBAX,

Did you get that bottle opener installed yet???

N-I-C-E M-O-D...

yep and the only way im able to do my sas and other stuff is because a duesch bag that was street racing rear ended me and i was able to fix the damage so i have a check to just dump into my truck

Well the third phase of 3 has been completed. Got 32 inch Yoko MT+ mounted this morning. Cant wait to see how they perform off road.

Nice Was any more trimming necessary?

I've got the bottle opener on Andy, and I just might use it now to enjoy a cold beer after flipping the springpacks around this morning.
(Thanks again to IH8Rubn for his garage )

EDIT to add- Whoops, 37 days!!

No trimming necessary at all Dan. It is amazing how just changing the tires can change the whole look/stance of the X.

Damn, I cant wait!

SAS - Check
Bumper Relocation - Check

Will need new tires by Gone so kinda check.

Crap!

I am totally getting jacked on getting my vacation time approved. I am going to be so bummed if I can't make it out for this.

Clunky front end and shitty gas prices be damned! I want MOAB!

Hope to see everyone there.

Use them sick days wisely

Just finished the motor mount and exhaust manifold replacements.

I’m going to try out the motor mount strap limit system I came up with this weekend baja’ing should be a good test. I’m tired of replacing them, pixs to follow next week.

Oh yyyeah, got a great deal on some used 32x11.50x15 MT/R's. These should perform ALOT better than my Dunlop Mud Rovers at Moab. Make that rim change #5 so far on this X.





Having some rubbing issues that I'll need to sort out before next month. May need to get some different rims. Maybe a BL...

Cool truck, PoorBoy!

My truck looks like your truck's younger brother!

I will look for you at Moab!

Thanks dnorton. Wow, very nice truck man! I like it! Which way are you heading to Moab? Roger (xterraintx) and I will be meeting up in some form in the Waco/Dallas area to head towards Moab. We're working on getting the details finalized. You're obviously welcome to caravan with us.