When I took out my factory radio, I cut the wires very close to the harness to give me the longest wire length to work with when installing my lcd head unit. Unfortunately, my lcd was stolen yesterday and now i have to install the factory radio again. Without thinking, i begain removing the clips of the big harness in order to re-attach each clip to the original wire. Now i don't know which order to put them in. I realized that i'd messed up before i started taking out the clips in the 2nd harness, but i'm left with the other one all unorganized. Can anybody tell me which color wire goes to which port of the plug?

All I gotta ask is why didn't you use a wiring harness to install your aftermarket stereo?

i had to completely re-route the wires from the dash to the back of the truck to feed into the "brain"

Here is the color coding,

http://www.xterraownersclub.com/cgi-local/ultimatebb.cgi?ubb=get_topic;f=38;t=000481#000000

But you'll also need this:

[img]http://groups.msn.com/_Secure/0SQDeAvEWbGQ3Rg!!sQh4BxmDPN3VzskVaJzddVZTOEZ77L0PPlIka*oboXwDUSVEM6JbY2Z9V7pBuVzgfE6NySN8t398wQZT57OVOFzWmZEUMy2xOF5xWA/StereoRear.gif?dc=4675394605930722935[/img]

Or you could just buy a new harness, I picked one up from Best Buy for under $15 after my installer left too little of wire to work with

Viper you are the MAN~~!!