heres dem pictures.
firewall on the left side if your facing the truck, right under the hole where the hood goes in.
![](http://img.photobucket.com/albums/v225/mannyc3/cbinstall003.jpg)
this is where it came out inside the truck
![](http://img.photobucket.com/albums/v225/mannyc3/cbinstall002.jpg)
then i went down the inner fender towards the battery
![](http://img.photobucket.com/albums/v225/mannyc3/cbinstall004.jpg)
right in front of the battery is where the headlights go in, i pushe back the cardboard like material and put the coax right thru there.
![](http://img.photobucket.com/albums/v225/mannyc3/cbinstall005.jpg)
this is where it come out of the engine bay and under the bumper to where i drilled the whole.
![](http://img.photobucket.com/albums/v225/mannyc3/cbinstall006.jpg)
on the inside this is where i ran the wires to the middle console.
![](http://img.photobucket.com/albums/v225/mannyc3/cbinstall007.jpg)
from what i remember, i took a wire coat hanger, and pushed it thru the grommet in the fire wall. when it came out inside the truck, i taped the coax to the hanger, and pulled it thru the firewall.
hope that helps, if it doesnt let me know what pics you need to see, i will take them.