I made this bumper and wanted to get some opinions. Its not finished yet, but will be next week. it just needs some aluminum in the open areas.

it looks awesome. couple questions i have and i am sure that they are dumb:

1. you just had to post that pic, didnt you???

2. will one be able to mount a winch to it?

3. what about front recovery points?

Yes, there is an open area to add a winch in there. When I put the aluminum in there im going to weld in a bar between the framehorns to stiffen those up and add a clevis shackle mount in there... Should work nicely

will they be available, or is it a "one of"?

edit to add: how much?

dibs on your current bumper if you buy one of his!!!

look at these scavengers! I can make one for you if you have a 2" BL as that would be the only jig I have to go by...

no body lift here.


as far as scavengers, at least i know some one will by my shrochworks bumper quickly and close

Shipping and a BL would put it out of my price range.

looks good BTW.

just fuking with Steelx

If I had a non BL-ed xterra around here I could borrow then I could make some. If you are serious about getting one I can locate one. Thanks!

sending pm now.

Again, looks great Richard...another example of fine fab. work.

sent pm, Damn which IL guy will have it first!
The race is on!

how come you never post over on MXO?, and even more important, how come you never go on any of our excursions?

I went to the Xcursion at badlands. Don't have the names at the moment but, a green pathy, white X and blue fronty. Also did mod day at wanderinwood. Also i get paid every 2 weeks and you guys run events on the week i don't get paid!Need to switch it up and i'm under Taz on MXO

frontier2k1, looks pretty sweet! Awesome flex! Are you Richard, Nick's friend?

So has someone called dibs on that Shrock bumper already? I wouldnt mind having one. I actually cant belive you would want to part with it- Shrock kicks ass.

EDIT TO ADD after reading again:
I guess that answers my question

Yep, we are roommates. Since you are so close lemme know if I can help ya out with any sliders, bumper, or cage work! Thanks for the compliments guys!

the one in march or sept.?

green pathy = erniedog
white x = 02terra
blue fronty = cygnus x-1

check your pm box.

one person is seriously considering buying it.

i love the bumper, dont get me wrong, but ive been wanting one of these types of bumpers since the first time i seen one on an X.

i think he was joking.

Cool, I met Nick in HP a while back right after your accident and he told me about it. Sucks. I hadn't seen his truck in Jamestown in a while so I wondered if he moved, but I still see his truck at his work so I knew he didn't move far. Where you guys living at now? Is that your silver X that your working on?

I may have to take you up on some help with some mods. I'm still pretty much stock and been wanting some sliders and a bumper. Nick said you do some nice work.

I guess that answers my question[/qb][/QUOTE]i think he was joking.[/QB][/QUOTE]

Out of my price range. Yours for the taking

We live over in High Point now. Yeah it sucks about the truck. The silver X is not mine, but a customers. I'd be glad to help you out with whatever you need. Thanks!

PM sent

my bumper is sold as of today.

Back to the original question:: I don't like stingers.... think they look dumb - but obviously a lot of people do like 'em... so... uh... there's my opinion

Hey! Long time no see!

No worries... thanks for your contribution...

yea, but Richard needs a stinger, you ever see him drive??

Opinions -

It looks like a nice job.



It looks like you might want to bring the frame horn mounts back further to the cross member before you do your tie in to brace it, as the box is kind of short otherwise.

To brace the winch fairlead/feet, etc...as you are doing Al plate for the gaps...I figure you plan a steel plate across the front, between the horns too? (Tie into front recovery point bracing?)

With the leverage of the stinger up front...you might want to sleave the frame horns, as they are (From what I can see at least...), what will be resisting and forces on the stinger...I do like the brace you have in that direction already too though.

I like the simple loop for the side/fender protection, it works for me.

I prefer bars to protect the rest of the front clip, not just the stinger...maybe a tie in from mid-stinger height, back to the wings or something...but that would change the lines, etc....but given the deer I hit in NJ all the time...the head light areas take a beating otherwise.



It might be the pic, but the tubing looks a bit light?

What's the diameter/wall thicknesses?

The frame horns are plenty strong believe it or not. My frontier took 7 rolls on the freeway on the ARB bumper and the frame horns were straight. I am not concerned about them bending in a roll over.The brace will go inbetween the frame horns to make sure they dont move and I measured the other day and its just fine. The bumper was made to the specs of the buyer and he didnt want bars going over headlights as he has an EXO cage planned in the future and thats when that will come into play. To brace the winch there will be tube coming off the mounts to some plate, gusseted of course and a couple more grade 8 bolts thru the frame.

The tubing is 1.75"x.120 wall DOM... Just the same as you would find on about any other bumper on the market.

haha.. yes. I do use my stinger..

Huh oh...going national......sweet bumper Richard

here are some pictures of the bumper with the aluminum...

Very nice Did you make the jig for the bumper,if so how?

how did u guys mout the alluminum??weld little tabs and bolt it on or what? I wanna put some on mine....

Thanks Max

also heres what i did on my frame horns to strengthen it up...old pic but theres the bar
Thanks Max

mine has that too, i just havent had it wleded in yet.

the sheet metal is held on by tabs that have been welded to the tubes and then bolted on.